Stained glass is fabulous, that is a fact. It can add a lot of luxury and charm to your home. Learning how to make it is not that difficult and you will see how in the following lines.
How to do it yourself.
As you have read stain glass production is a hard thing and you cannot do it at home. However there is an alternative that will allow you to make wonderful stained glass pieces.
The first thing you will need is the pattern. There are many patterns available in the internet so just spend some time and find the one you like the most.
Once you have your pattern number it and cut it apart. As you ca see stained glass is made of various small colored glass pieces so the pattern should correspond to this idea.
The cut and numbered pattern is than traced onto the glass. Use glass of different colors for ach part of the pattern. Break the pattern into pieces and foil them together. When all pieces have been foiled, place them into the assembly jig.
The next step is to solder the pieces together. It is important that you solder all foiled joints to create the metal web that holds the glass pieces. Use solder and soldering iron and fill carefully all joints.
In fact your stained glass project is finished. All you need to do is to clean it using water and a soft cloth. You can also add an ancient look by applying some patina solution after the cleaning.
Fake stained glass.
If the above sounds too complicated or you do not have the time and the tools to achieve it, try some fake stained glass projects. You can get some glass and pint it with glass paints to achieve the look of original stained glass.
You can buy glass paints from every craft shop. Usually they come along several stained glass patterns. If you do not like the patterns provided search for new ones in the internet.
Working with glass paints is not that difficult. All paint glass sets come along a transparent foil that you can place over the pattern and trace it. After the paints are completely dry you should peel of the pattern and stick it to the glass.
Another option is to cut the pattern and trace it on the glass. Than you can pain straight over the glass.
![[Valid RSS feed]](/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
